Signed drivers for windows 2000, Found new hardware wizard – HP ProLiant BL10e G2 Server Blade User Manual
Page 12
Signed Drivers for Windows 2000
During the installation of the operating system, caution messages might appear
concerning unsigned software drivers. The caution message states “
Digital
Signature is Not Found
” as drivers are about to be installed. When prompted,
click Yes to accept the drivers and continue the installation. If you are prompted to
reboot the server, click No. After the operating system installation is complete,
download digitally signed
.
Found New Hardware Wizard
The Found New Hardware Wizard might appear during the operating system
installation. Click Cancel when the Found New Hardware Wizard begins. Do not
attempt to proceed with the installation of drivers until after the second logon, when
the operating system is fully installed.
IMPORTANT: Do not attempt to install the drivers during the operating system installation
because the server might automatically reboot before the driver installation has been
completed. This could result in incorrect installation of a device.
To install drivers after the operating system installation is complete:
1. Click Next at the Found New Hardware Wizard window.
2. Select Search for a Suitable Driver for My Device, and then click Next.
3. Select Specify a Location, deselect Floppy Drive and CD-ROM, and then
click Next.
4. Enter the following path in the text box, then click OK:
C:\HPDRVRS
5. Click Next at the Driver Files Search Results screen.
6. Click Finish to complete the Found New Hardware Wizard.
12
HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM