Auerswald 2206 USB - Manual (Page 54)

54 Call Groups (Teams)
If you try to „log in outbound and inbound“ into different
groups, you will be only „logged in outbound“ in the last group
tried. In the other groups you will be only „logged in inbound“.
If this kind of group Call Forwarding has to point always to the
same destination telephone, the destination telephone number
will have to be configured only once. Afterwards the Call Forwarding is
just switched on or off.
These settings are configuration dependent.
The „Forward telephone on Busy“ is configured similarly as described
for the „CF unconditional“ above. The digits 12
only have to be
exchanged for
13
in order to switch on/off a „CF on busy“ instead of an
„CF unconditional“.
The „Forward telephone on no Reply“ is configured similarly as
described for the „CF unconditional“ previously. The digits 12
only
have to be exchanged for
14
in order to switch on/off an „CF on no
Reply“ instead of an „CF unconditional“.
The „Forward telephone if all subscribers are logged out“ is configured
similarly as described for the „CF unconditional“ previously. The digits
12
only have to be exchanged for
15
in order to switch on/off an „CF
if all subscribers are logged out“ instead of an „CF unconditional“.
b 7 Q 400 #
Log out of all Groups
telephone of the
group member public
password
☞
Log out all Members of a single Group
b 7 Q 480 G #
Log out all Members of a single Group
telephone of a
group member public
password internal number of
the group
Forward Group „unconditional“ to an internal/external Telephone because all Group Members are absent
b 7 Q 12 _ 1 n *G #
Switch on group Call Forwarding
with entry of an internal subscriber
telephone number as destination public
password
„CF unconditional“
(for „CF on busy“ 13 instead of 12 or
„CF on no Reply“ 14 instead of 12 or
„CF if all members are logged out“
15 instead of 12)
internal number
of the target tele-
phone
star and inter-
nal number of
the group to be
forwarded
or
0r
Switch on group Call Forwarding
with entry of an external telephone
number as destination Exchange Line
Access Number and
external number of
the target telephone
or
k
Switch on group Call Forwarding
with entry of a Short-Code Dial
Number as destination Short-Code Dial
Number of the target
telephone (private
are not possible)
☞
N
Forward Group „on Busy“ to an internal/external Telephone because all Telephones „logged in“ are currently Telephoning
Forward Group „on no Reply“ to an internal/external Telephone because all Group Members are absent for a Moment
Forward Group „if all Subscribers are logged out“ to e.g. an Answering Machine