Auerswald 2206 USB - Manual (Page 59)

Installation and Use of the bundled Software 59
ቢ Insert the CD-ROM (Auerswald Mega Disk) into the CD-ROM drive.
ባ Sometimes the installation will not be started automatically. In this case you
can start Setup manually: On your desktop click on the „Start“ button in the
task bar and select „Run“.
Click on „Browse“.
ቤ Open the CD-ROM drive with the Auerswald CD-ROM. Select the applica-
tion „Setup“ in the root directory by double click. Then click on „OK“.
ብ Follow the instructions on the screen. You will find the installation for pro-
grams under the software for the corresponding system.
Minimum Requirements for the PC
˾ PC with Intel Pentium 266 MHz or compatible processor
˾ Operating system:
Windows 98 SE, Windows Me, Windows 2000 (with service pack 4
or later), Windows XP (with service pack 2 or later), Windows
NT 4.0 (with service pack 3 or later)
but: no Windows NT 4.0 if you use USB interface
˾ RAM memory:
64 MB, 128 MB recommended
for Windows XP: 128 MB, 256 MB recommended
˾ USB interface (if used) according to USB specification 1.1 or 2.0
˾ CD-ROM or DVD drive
˾ Mouse or compatible pointer device
˾ SVGA graphics board with 800 x 600 resolution,
1024 x 768 resolution and 65536 colours (16 Bit) recommended
˾ Available hard disk space for installation of COMtools: 8 MB, COM-
list: 8 MB and Soft-LCR: 2 MB
+ 40 MB for the one-time installation of the Java Runtime
Pic. 3: ISDN PC-controller
on internal S
0
port
Pic. 4:
Connection: USB Interface
(COMpact 2206/4410 USB)
Pic. 5: ISDN PC-controller on internal
S
0
port (e.g. COMpact 4410 USB)
Pic. 6: COMfort 2000 on
internal S
0
port
Installation of the Software