Auerswald 2206 USB - Manual (Page 68)

68 Digit Code Index
.
g (F) n f a
Start internal call during an external call
and hang up (Open Query)
f g (F) 7 f a
Put the external caller into the Waiting
Loop if Transfer was unsuccessful
g(F)670rga
Transfer external caller to external
Telephone (External to External Transfer)
g(F)4ng(F)0 g
Calling an internal third Calling partner
and transfer to the second calling Partner.
Settings
Alarm -> page 43 and page 47
7 O 691 #
Activate Alarm input for one Alarm
7 O 692 #
Activate Alarm input for multiple
Alarms
7 O 690 #
Deactivate Alarm input
M f7 W f
Start programming via an external
Telephone ...
691 #
... and activate Alarm input for one
Alarm
692 #
... and activate Alarm input for
multiple Alarms
690 #
... and deactivate Alarm input
7 O 442 # f * g # Record Alarm Announcement and
save it (COMpact 4410 USB and
COMmander Basic only)
7 O 466 # f #
Listen to stored Alarm
announcement
Announcement before Answering -> page 48
7 O 443 # f * g # Record Welcome Message
„Announcement before Answering“
and store it
7 O 467 # f #
Listen to stored Welcome Message
Automatic Dialling (BabyCall) -> page 39
7 Q 191 n #
Switch on Automatic Dialling by entering an internal
telephone number as target.
7 Q 191 # Switch on Automatic Dialling without entry of
telephone number because number has already
been saved.
7 Q 190 #
Switch off Automatic Dialling (start dialling within 2
seconds).
Automatic Reception -> page 48
7O23S#
Activate/Deactivate Automatic Reception.
Call Allowance and Call Charges -> page 31
7 Q 93 S #
Switch on or off Automatic Least Cost
Routing.
7 O 74 n * e #
Limit the Call Allowance to a certain
number (0000...9998) of units.
7 O 74 n*9999#
Set the Call Allowance to „unlimited“.
7 O 73 n * e #
Increase the Call Allowance by a
certain quantity of units (0000...9998).
7 O 72 n # f
Enqire level of Call Allowance account
of single subscriber.
7 Q 72 # f
Enquire status of Call Allowance
Account.
7 Q 71 # f
Enquire Call Charges accumulated for
the phone.
7 O 71 n # f
Enquire the call charge sums of single
subscribers.
7 O 70 n #
Delete Call Charge sums of single
subscribers.
Call Charge Data -> page 32
7 O 50 S #
Start or stop Call Charge Data printout
7 O 51 n * 0 #
Instruction to print the Call Charge Data of a
single subscriber’s calls.
7 O 51 n * 1 #
Instruction of printing the Call Charge Data
of a single subscriber’s business calls.
7 O 51 n * 2 #
Instruction of printing the Call Charge Data
of a Subscriber’s private calls.
7 O 52 #
Delete all Data out of the Call Charge Data
Memory.
7 O 86 0 #
Select operation mode “No special functions“
7 O 86 1 #
Select operation mode „Selection via PC
with ATD command“
7 O 86 2 #
Select operation mode „Continuous Call
Data output“
7 O 86 3 #
Select operation mode „Data exchange with
external programs“
7 O 86 4 #
Select operation mode „D-channel protocol
output in ASCII format“
7 O 86 5 #
Select operation mode „D-channel protocol
output in binary format“
7 O 86 6 #
Select operation mode „TAPI Mode“
Call Forwarding (Subscriber), Follow-me -> page 25
7Q121n# Immediately a) switch on Subscriber Call Forwarding
with entry of internal telephone number as
destination.
7 Q 12 1 # Immediately a) switch on Subscriber Call Forwarding
without telephone number entry because it has
already been saved.
7 Q 12 0 #
Immediately a) switch off Subscriber Call Forwarding.
7 Q20 #
Switch off all Subscriber Call Forwardings on the
telephone.
7 Q25 n #
Switch on Follow-me on target telephone.
7 Q25 0 #
Switch off Follow-me on target telephone.
M f7 W f
Start programming from external telephone... .