Ampeg B500DR - Manual (Page 6)

OFF
OFF
OFF
ON
OFF
OFF
ON
ON
6
Some Suggested Settings
ROCK:
JAZZ:
COUNTRY:
FUNK “POPPING:”
Rack Mounting
When mounting the amplifier into a rack, the four bottom feet should be removed to maintain the two rack space height of the amplifier.
Be sure to keep the feet and their attachment bolts for future use. If the feet are reinstalled, never use screws which will protrude far-
ther into the amplifier than the original hardware.
The rack must be a high quality enclosure capable of securely supporting the weight of the amplifier. Tighten the mounting screws
securely through the amplifier’s face plate, into the rack rails. Check the rack and mounting screws occasionally to ensure a continual-
ly safe and secure installation.
B500DR Programmable Bass Amplifier