HP Intelligent Management Center Licenses - Manual (Page 41)

Modify Operators
Modify an operator with certain ID.
Interface URI
/plat/operator/{id}
Access Method
HTTP
PUT
Parameters
Path parameters
Operator ID. id
Long integer type. Required. No default value.
Message body
<operator>
<fullName>cccccc</fullName>
<authType>1</authType>
<sessionTimeout>20</sessionTimeout>
<operatorGroupId>2</operatorGroupId>
<desc>cccccc</desc>
<defaultAcl>1</defaultAcl>
<operatorAclList>
<operatorAcl>
<startIp>10.153.89.5</startIp>
<endIp>10.153.89.6</endIp>
<accessType>0</accessType>
<desc>allow 10.153.89.5–10.153.89.6</desc>
<aclOrder>1</aclOrder>
</operatorAcl>
<operatorAcl>
<startIp>10.153.89.7</startIp>
<endIp>10.153.89.8</endIp>
<accessType>1</accessType>
<desc>block 10.153.89.7–10.153.89.8</desc>
<aclOrder>2</aclOrder>
</operatorAcl>
</operatorAclList>
</operator>
Element remarks
For descriptions of the fields in the message body, see “Query Operator Groups” (page 44) .
Returned Result
Status codes
•
204 (No Content): Success.
•
404 (Not Found): Data corresponding to the ID is not found.
•
409 (Conflict): Failure. See “ Error Codes .”
Modify Operators 41