HP Intelligent Management Center Licenses - Manual (Page 25)

encapsulation type, and CE device. Refer to the "local PE configuration" part for the operation
procedure and precautions.
4. Configuration summary.
This function displays the configuration commands to be deployed to PE devices.
a.
On the remote PE configuration page, click Next to enter the summary page.
Precautions
•
The configuration commands are generated by the system automatically. You cannot
modify them.
•
If you do not select Deploy Immediately, the system only creates the VPN and adds an
"Undeployed" deployment task to the deployment task list. You can deploy the
configuration later. If you select Deploy Immediately, the system deploys the configuration
to the devices immediately. A CE device and a link between the CE device and PE device
are added on the L2VPN Manager and the deployed configuration is recorded on the
related devices.
PBB deployment
This function helps you configure and deploy a VPN of PBB type. After you configure a PBB VPN,
if you do not deploy the VPN configuration immediately, a deployment task in state of "undeployed"
is added on the deployment task list. If you deploy the VPN configuration immediately, a deployment
task in state of "deploying" is added on the deployment task list. After the deployment, you can
view the deployment result.
1. Define VPN.
This function allows you to configure a VPN's basic information, including VPN name, I-SID,
B-VLAN, PW transport mode, audit interval, VPN description, and contact information.
Precautions
•
Valid characters in a VPN name are letters, digits, and underscores.
•
I-SID is generated randomly. You can modify it in the range 1 to 16777215.
•
B-VLAN is 1 by default. You can modify it in the range 1 to 4094.
•
PW transport mode can be VLAN or Ethernet. VLAN is the default.
•
Audit interval ranges from 0 to 24 and defaults to 24. A value of 0 means no audit.
•
Contact is the current login user by default.
2. PE configuration.
This function allows you to configure the PE information and AC information for a PBB VPN.
The PE information includes PE device name and NNI interface. The AC information includes
UNI interface, service instance, bandwidth, encapsulation type, encapsulation VLAN, access
type, and CE device.
Steps to configure the AC information
a. Click the Add button in the AC list area, and then on the pop-up page, select a PE
interface.
b. Type the service instance ID, encapsulation VLAN ID and bandwidth, and select the
encapsulation type and access type.
c. Click the Select button behind the CE Device text box, and then on the pop-up page,
select a CE device.
d. Click OK.
Using L2VPN Manager 25