Displaying diagnostic tests during reset, Displaying diagnostic tests during reset –4 – American Dynamics RAS917WLS-1 User Manual
Page 60
Displaying Diagnostic Tests During Reset
You can choose to have dome diagnostic tests run whenever the dome resets. The diagnostic
information displayed includes:
•
Communications Loopback Test
•
Camera Loopback Test
•
Motor Circuit Test
If you do not want diagnostic information to appear when the dome resets, a screen displaying the
firmware version numbers for the Boot and Application code and the maximum optical zoom for the
dome appears.
I M P O R T A N T
Enabling diagnostic tests may cause a momentary loss of communication on the network
when the dome diagnostics are executed.
Changing the Display of Diagnostic Information
1. Select
On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Diagnostic Display.
3. Change the setting.
•
If you want diagnostic tests to run when the dome resets, select On.
•
If you do not want diagnostic tests to run when the dome resets, select Off. This choice
displays the firmware versions whenever the dome resets.
The default setting is Off.
4. Select
Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
5–4
SpeedDome Ultra VII Day/Night Operator's Manual