Apex Digital Apex DT502 User Manual

Quick start guide, Easy 3 step installation, Converter box installation

Advertising
background image

QUICK START GUIDE

DT502

Easy 3 Step Installation

Converter Box Installation

Composite/AV Connection

Initial Setup

Scan Channels

1

L

AUDIO

R

CH 3

CH 3/4 &

Analog Pass-Through

CH 4

S-VIDEO

VIDEO

SMART

ANTENNA

Yellow

Yellow

Video Input to TV

Over-the-air Antenna

Connect your over-the-air antenna
to your converter box

Connect Video/Audio inputs

Back of Converter Box

Audio L / R Input to TV

White

White

Red

Red

Thank you for your purchase of the Apex Digital converter box. Remove the converter box from packaging and
proceed with the following steps for optimal connection and experience.

Change your TV input mode to

VIDEO/COMPOSITE.

Power converter box ON. An
Installation Guide will automati-
cally start up. Use the arrow
buttons to select your

Language,

Time Zone, Daylight Savings,

and then press “

OK” to initialize

auto channel scan.

Allow the converter box to scan
until

100% for all available digital

channels. Onceinstallation scan is
complete, the first scanned chan-
nel will display.

** If your TV does not have composite/AV inputs, please refer to the Page 9 in the User’s Manual for RF connec-

tion. Your converter box and TV must be set to the same receiving channel (CH3 or CH4) in order to view digital

channels. Receiveing channels may vary between CH3 and CH4 depending on your location.

* In order to receive digital signals, you MUST connect an over-the-air antenna to your converter box.

* Channels may be deleted or added after Auto Program Channel scan. Please refer to page 14 in the User’s

Manual for more information.

For additional questions, please visit our website www.apexdigitalinc.com or call us at (866) 427-3946 Monday-Friday, 6am-6pm PST.

2

3

2

2

2

1

1

1

POWER

ANTENNA IN

TV OUT

OK

Next Page

Installation Guide

OSD Langauge

English

English
Spanish
French

OK

Installation Guide - Finish

Setup Completed

The system is configured as followed:

OSD: English

Time Zone: Pacific (-8:00)

Daylight Savings: AUTO

Detected Digital Channel: 51

Detected Digital Frequencies: 22

Press OK to complete a setup and exit to watch TV

S E R I E S

Advertising