Set the copy draft setting, Check the scanner glass for dirt and smudges – HP LaserJet Pro M1536dnf MFP SERIES User Manual

Page 106

Advertising
background image

Set the copy draft setting

Use the control panel to set the product to print copies in draft mode.

NOTE:

This setting affects copy quality only. Print quality is not affected.

1.

On the product control panel, press the

Copy Menu

button.

2.

Use the arrow buttons to select the Draft Mode menu, and then press the

OK

button.

3.

Use the arrow buttons to select the On or Off option.

4.

Press the

OK

button to save the selection.

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.

1.

Use the power switch to turn off the product,

and then unplug the power cord from the

electrical socket.

2.

Open the scanner lid.

3.

Clean the scanner glass and the white plastic

backing with a soft cloth or sponge that has

been moistened with nonabrasive glass

cleaner.

CAUTION:

Do not use abrasives, acetone,

benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the product; these

can damage the product. Do not place liquids

directly on the glass or platen. They might seep

and damage the product.

92

Chapter 8 Copy

ENWW

Advertising
This manual is related to the following products: