HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 124)

Set up fax
Install and connect the hardware
Connect fax to a telephone line
The product is an analog device. HP recommends using the product on a dedicated analog telephone
line.
NOTE: Some countries/regions might require an adapter to the phone cord that came with the product.
Connect additional devices
The product includes two fax ports:
● The “line” port , which connects the product to the wall telephone jack.
● The “telephone” port , which connects additional devices to the product.
Telephones used in conjunction with the product can be employed in two ways:
● An extension phone is a phone plugged into the same phone line at another location.
● A downstream phone is one that is plugged into the product or a device that is plugged into the
product.
Connect additional devices in the order that is described in the following steps. The output port for each
device is connected to the input port of the next, forming a "chain". If you do not want to connect a
specific device, skip the step that explains it and continue to the next device.
NOTE: Do not connect more than three devices to the telephone line.
NOTE: Voicemail is not supported with this product.
1. Unplug the power cords for all of the devices that you want to connect.
2. If the product is not yet connected to a telephone line, see the product installation guide before
proceeding. The product should already be connected to a telephone jack.
110 Chapter 10 Fax ENWW