Fax from the document feeder, Manual dial faxing – HP LaserJet Pro M1536dnf MFP SERIES User Manual
Page 148
Fax from the document feeder
1.
Insert the originals into the document feeder
face-up.
NOTE:
The document feeder capacity is up
to 35 sheets of 75 g/m
2
or 20 lb media.
CAUTION:
To prevent damage to the
product, do not use an original that contains
correction tape, correction fluid, paper clips, or
staples. Also, do not load photographs, small
originals, or fragile originals into the document
feeder.
2.
Adjust the guides until they are snug against
the paper.
3.
Press the
Phone Book
button.
4.
From the list, select the phone book entry. If no
entry exists, use the keypad on the control
panel to dial the number.
5.
On the control panel, press the
Start Fax
button. The product starts the fax job.
Manual dial faxing
Usually, the product dials after you press the
Start Fax
button. At times, however, you might want
the product to dial each number as you press it. For example, if you are charging your fax call to a calling
card, you might need to dial the fax number, wait for the acceptance tone of your telephone company,
and then dial the calling card number. When dialing internationally, you might need to dial part of the
number and then listen for dial tones before continuing to dial.
134 Chapter 10 Fax
ENWW