HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 156)

Receive faxes when fax tones are audible on the phone line
If you have a telephone line that receives both fax and telephone calls, and you hear fax tones when
you answer the telephone, you can start the receiving process in one of two ways:
● If you are close to the product, press the Start Fax button on the control panel.
● If not, press 1-2-3 in sequence on the telephone keypad, listen for fax transmission sounds, and
then hang up.
NOTE: In order for the second method to work, the Extension Phone setting must be set to Yes.
Receive faxes to a computer
NOTE: Receiving faxes by using a computer is not supported for Macintosh.
Receiving faxes to a computer is available only if a full software installation was performed during initial
product setup.
To receive faxes to your computer, turn on the receive-to-PC setting in the software.
1. Open HP ToolboxFX.
2. Select the product.
3. Click Fax.
4. Click Fax Tasks.
5. Under Fax Receive Mode, select Receive faxes to this computer.
Turn off the receive-to-PC setting from the control panel
The receive-to-PC setting can be activated only from one computer. If for any reason that computer is
no longer available, you can use the following procedure to turn the receive-to-PC setting off from the
control panel.
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the Fax Setup menu, and then press the OK button.
3. Use the arrow buttons to select the Advanced Setup menu, and then press the OK button.
4. Use the arrow buttons to select the Stop Recv to PC option, and then press the OK button.
View a new fax when in receive to PC mode
1. Open HP ToolboxFX.
2. Select the product.
3. Click Fax.
4. Click Fax Receive Log.
5. In the Fax Image column, click the “view” link of the fax that you want to view.
142 Chapter 10 Fax ENWW