HP LaserJet Pro M1536dnf MFP SERIES - Manual (Page 210)

Replace the separation pad
Normal use with good media causes wear. The use of poor media might require more frequent
replacement of the separation pad.
If the product regularly pulls multiple sheets of media at a time, you might need to change the separation
pad.
WARNING! Before changing the separation pad, use the power switch to turn the product off, unplug
the power cord, and then wait for the product to cool.
NOTE: Before you change the separation pad, clean the pickup roller.
1. Remove the paper and close the main-input tray. Set the product on its side.
2. At the bottom of the product, unscrew the two screws holding the separation pad in place.
196 Chapter 11 Manage and maintain the product ENWW