HP 2000SA G2-Modular-Smart-Array - Manual (Page 34)

Table 7 Graphing metrics for drives (continued)
Available with P2000 G3
MSA firmware version Drive individual metrics Drive group metrics
not respond.
Spinup Retry Count Port 2—Number of attempts by the
storage system to spin up the disk.
Number of Media Errors Port 2—Number of media errors
generated by the disk, as specified by its manufacturer.
Number of Non-media Errors Port 2—Number of other
errors generated by the storage system or generated by
the disk and not categorized as media errors.
Number of Block Reassigns Port 2—Number of times blocks
were reassigned to alternate locations.
Number of Bad Blocks Port 2—Number of bad blocks
encountered.
Viewing logs
The Logs menu lists all execution events performed by the tool.
NOTE: To change the sorted order of the display, click a column heading.
The following information is displayed in the log table:
Time—Time the message was generated
Severity—Importance of the advisory (Warning or Informational)
Message—Brief description of the activity
Viewing icon definitions
The Legend menu opens a window, displaying information about all icons used by the tool.
Table 8 Array health status icons
Description Name Icon
Array is operating normally and is accessible. OK
Array has a critical problem that needs to be addressed immediately. Critical
One or more components have failed, but the array is still functioning. Degraded
Management information about the array cannot be obtained. Unknown
Table 9 Array access status icons
Description Name Icon
A management connection to the array is available and the tool cannot collect
performance data until the password is fixed. Previously obtained information
is available for display. Password
Unknown
The management connection to the array is no longer available and the tool
cannot collect performance data until the connection is reestablished. Previously
obtained information is available for display. Offline
34 HP P2000 MSA Performance Tool