HP Neoware e140 Thin Client - Manual (Page 153)

6-69
Setup Menus
BQ 3107 Settings
This dialog box is displayed by selecting BQ 3107 in the Settings menu.
Operating Mode
Factory default: Block
In Block mode, keyboard entered data is displayed and processed locally, allowing
you to edit it before a block of data is sent to the host. In Character mode, keyboard
entered data is sent simultaneously to the host and the display.
VIP Mode
Factory default: 7760
The VIP mode can be set to 7700 or 7760.
Rendition Mode
Factory default: VIP
The setting of this option determines whether VIP or SDP display attributes are used.
Transmit Terminator
Factory default: ETX
This specifies the last character that is sent to indicate the end of a block transmission.
The character can be ETX, EOT or CR.
Partition 0
Factory default: Message Row
The display is divided into two partitions numbered 0 and 1. Partition 0 is a single line
that can be used to display status reports and messages either at the bottom or top of
the display, as determined by the setting of the Message Row option. Partition 1 is a
page of 24 lines. The setting of this option determines whether Partition 0 is Blank or
used as a Message Row.