HP Neoware e140 Thin Client - Manual (Page 417)

C-47
Host Command Summary
*c = number of columns displayed (80 or 132)
*g = general status (1 = multiple active page format,
2 = per-character attributes)
Printer status report (*g = general status, *b = buffer left) ESC [ < 12 ; *g ; *b n
Keyboard status report (*m = mode, *g = general status) ESC [ < 13 ; *m ; *g n
Cursor position report (*l = line, *c = column) ESC [ < *l ; *c R
SYSTEM MESSAGES
Write data into system message area starting at column * ESC [ * % }
System messages not visible ESC [ < 8 l
System messages displayed on last screen line ESC [ < 8 h
TERMINAL CONTROL
Soft reset ESC [ & p
Reset to initial state ESC c
ANSI terminal emulation mode ESC [ < 12 l
Model 12080 terminal emulation mode ESC [ < 12 h
Sound alarm BEL
MDIS Prism-12 Emulation
When teemtalk is running the Prism-12 emulation, the following commands will be
executed in addition those listed previously for Prism-8 and Prism-9.
Data stream filler character NUL
Cursor home SOH
Function key control STX *
* = Generate user defined codes 90
Do not generate any codes 91
Generate standard codes 92
Generate short codes (hex 80 - B3) 93
Set video attributes for next display field ETX *
Cursor forward 1 character position ACK
Sound bell BEL
Backspace BS
Line feed LF
Cursor vertical position VT *
Form feed FF
Carriage return CR
Select Multinational character set (in Multinational mode) SO
Select ASCII character set (in Multinational mode) SI
Horizontal position DLE *
Cursor back NAK
Cursor up SUB
Escape sequence introducer ESC
Special single shift GS *
Space compression codes Hex A0 to Hex BF
Reserved Hex E0