HP Neoware e140 Thin Client - Manual (Page 419)

C-49
Host Command Summary
PT250 Emulation
AREA & LOGICAL ATTRIBUTES
Assert defined logical attributes ESC [ > 3 h
Assert defined logical attributes disabled ESC [ > 3 l
Clear (reset) selected areas ESC $ K
Define area qualification ESC [ * o
* = All printing characters 2
Numeric characters 3
Alphabetic characters 4
Right-justify in area 5
Protected; no input accepted (default) > 0
Must enter the area
> 1
Must fill the whole area > 2
Set modified data tag > 3
Define logical attributes ESC [ * v
* = All printing characters 2
Numeric characters 3
Alphabetic characters 4
Right-justify in area 5
Protected; no input accepted (default) > 0
Must enter the area
> 1
Must fill the whole area > 2
Set modified data tag > 3
Field entry check ESC $ C
Logical attributes start ESC $ L
Logical attributes end ESC $ M
Protected area start ESC V
Protected area end ESC W
Reset modified tags ESC $ J
Selected area start ESC F
Selected area end ESC G
CHARACTER SET SELECTION
Set G0 alternate character set ESC $ 2
Set G0 ASCII character set ESC $ 0
Set G1 alternate character set ESC $ 3
Set G1 ASCII character set ESC $ 1
COMPRESSED COMMANDS
Compressed cursor position (*l = line, *c = column) ESC 0 *l *c
Compressed logical area (* = logical attribute) ESC 3 *
Compressed logical attributes (*l = line, *c = column
*a = logical attributes *n = number of characters)
ESC 1 *l *c *a *n
Compressed visual area (* = visual attributes) ESC 4 *
Compressed visual attributes (* = visual attributes) ESC 2 *