HP ProLiant DL380 G5 Server - Manual (Page 17)

Post-installation tasks 17
Event log errors
After the ProLiant Installation Utility is complete, event log error messages related to certain controller
drivers might appear. These messages are expected at this time and do not affect the performance of the
server or the operating system. Possible messages include:
Unable to read IO control information from NBT device. Refer to article
#Q257760 on the Microsoft® website (
http://www.microsoft.com ).
Backing up the server
After you complete the software installation and the server is operational, back up the server using a tape
backup system in conjunction with approved tape backup software.
Configuring network protocols
The TCP/IP services are automatically installed. Microsoft® Windows Server™ 2003 R2 requires TCP/IP
to be enabled.
Setting up Remote Access Server
To use the RAS service with an installed modem:
1. Click Start, and select Control Panel.
2. Double-click Network Connections.
3. Double-click Dial-up Connections>Make a New Connection.
4. Select the network connection type, and complete the rest of the setup as prompted.
For more information on required networking parameters, refer to the operating system documentation.
Installing Java Virtual Machine
The Java™ Virtual Machine utility ( http://www.java.com ) might need to be downloaded and installed on
your server to completely and properly view some web pages using Internet Explorer 6.0. For example,
when viewing the Web Agent Help from the System Management Homepage, text that appears in the left
column of the Help screen is not displayed properly if Java™ Virtual Machine is not installed.