HP XP P9000 Command View Advanced Edition Software - Manual (Page 248)

Disabling the Device Manager refresh function
In open systems in which all copy pairs are managed by pair management servers, specify the refresh
settings to prevent the Device Manager refresh function from executing during a manual refresh. If
this function is used to refresh copy pair statuses, processing time increases.
TIP:
If copy pairs have been defined using storage system operation management software such as Remote
Web Console, the configuration definition file does not exist. In this case, copy pairs that are not
managed by pair management servers exist.
You can also disable the Device Manager refresh function during automatic refreshing. For details,
see “
Refreshing the copy pair status automatically for each information source ” on page 250.
To disable the Device Manager refresh function:
1. From the Explorer menu, choose Settings and then Refresh Setting.
The Refresh Setting subwindow appears.
2. Click the Monitoring Setting link.
The Monitoring Setting subwindow appears.
3.
Click the icon of the information source for which you want to disable the Device Manager
refresh function.
The Edit Interval of Refresh Pair Status - information-source-name dialog box appears.
Refreshing management information 248