HP Workstation xw8000 - Manual (Page 63)

3-31
Adaptec Storage Manager-Browser Edition
Enabling and Configuring the Notifier Service
Before you begin to configure e-mail notification you need to have
the following information available:
■ The SMTP mail server host name or IP address.
■ The port that SMTP mail server is configured to use. The default
value of 25 was chosen because it is the default for most SMTP
mail server packages. If you are unsure ask your e-mail
administrator.
■ The SMTP e-mail address to which all returned e-mail should
be forwarded. SMTP e-mail addresses take the form
[email protected].
■ The SMTP e-mail address of all users that need to receive event
notifications.
Before you configure the notifier be sure the notifier service and
ARCPD are stopped.
Controlling ARCPD for Windows 2000
To stop the ARCPD for Windows 2000, right click My Computer >
Manage > Service and Applications >
then right click Adaptec
Web Server > Stop > Yes. This will also stop the Adaptec Storage
Manager Notifier .
To restart, repeat the process above for both the Adaptec Web
Server
and the Adaptec Storage Manager Notifier and click Start
instead of Stop.
Controlling ARCPD for Unix and Linux
The ARCPD starts automatically in both Unix and Linux. To stop
the ARCPD, in the /opt/Adaptec/SMBE/etc prompt, type Daemon
stop
.
To restart, type Daemon restart (as it appears in the list of
selections in /opt/Adaptec/SMBE/etc).
UG.book Page 31 Saturday, October 26, 2002 12:08 PM