Use the services menu – HP LaserJet P2035 User Manual
Page 32
Print on both sides of the page (duplex printing)
Print on both sides manually
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For Tray 1, load the letterhead paper face-up with the top edge feeding into the product first.
●
For all other trays, load the letterhead paper face-down with the top edge at the front of the
tray.
2.
On the File menu, click Print.
3.
On the Finishing menu, select Manually Print on 2nd Side.
4.
Click Print. Follow the instructions in the pop-up window that appears on the computer screen
before placing the output stack in Tray 1 for printing the second half.
5.
Go to the product, and remove any blank paper that is in Tray 1.
6.
Insert the printed stack face-up into Tray 1 with the top edge feeding into the product first. You
must print the second side from Tray 1.
7.
If prompted, press the appropriate control-panel button to continue.
Use the Services menu
If the product is connected to a network, use the Services menu to obtain product and supply-status
information.
1.
On the File menu, click Print.
2.
Open the Services menu.
3.
To open the embedded Web server and perform a maintenance task, do the following:
a.
Select Device Maintenance.
b.
Select a task from the drop-down list.
c.
Click Launch.
4.
To go to various support Web sites for this device, do the following:
a.
Select Services on the Web.
b.
Select Internet Services, and select an option from the drop-down list.
c.
Click Go!.
22
Chapter 4 Use the product with Macintosh
ENWW