HP XP P9000 Command View Advanced Edition Software - Manual (Page 40)

3. Execute the processing. The task is registered to Data Collection Tasks tab. If you changed settings
in the Edit Hosts dialog box, after the task has completed successfully, execute a refresh operation
using Refresh Hosts.
The host list is updated.
Changing settings for a host registered by using Device Manager agent
When the Device Manager agent is being used, host information is automatically sent from the Device
Manager agent periodically. Execute Refresh Hosts as necessary. Additionally, after changing settings
from the Edit Hosts dialog box, depending on the changed settings, it may be necessary to use Refresh
Hosts to update host information.
To make changes to each item, see the following table:
Table 4 Updating host information using Device Manager agent
Edit Hosts Refresh Hosts Item
Y
1 N Host Name
N Y OS Type
N Y IP Address
N N User ID/PW
Y
2
Y
2 Port Type
Y
2,3
Y
2 WWN
N N
4 WWN Nickname
Legend:
• Y : Can be edited or refreshed
• N : Cannot be edited or refreshed
Notes:
1. When copy pairs are managed by a host where Device Manager agent is installed, you need to restart
the Device Manager agent service after changing the host name. After the Device Manager agent service
is restarted, the new host name is applied by updating the storage system.
2. WWNs and their port types that have been added can be affected by the Refresh Hosts button, but deleted
WWNs and their port types cannot be affected. To delete such WWNs, the Edit Hosts button needs to
be used.
3. If you want to allocate volumes to a FCoE port, you need to manually add a WWN.
4. To update WWN nicknames that have been specified by using storage system management tools such
as Remote Web Console, refresh the storage system information. When several WWN nicknames are
assigned to a single HBA, only one of the nicknames is displayed for that HBA.
To edit and refresh hosts using Device Manager agent:
1. From the Administration tab, select Managed Resources.
2. On the Hosts tab, select the host to update, then click either Refresh Hosts or Edit Hosts depending
on the items that you want to update.
3. Execute the processing. The task is registered to Data Collection Tasks tab. If you changed settings
in the Edit Hosts dialog box, after the task has completed successfully, execute a refresh operation
using Refresh Hosts.
Discovering, registering, and adding management targets 40