Multi-processor online spare population order, Mirrored memory population guidelines, Single-processor mirrored memory population order – HP ProLiant DL380 G7 Server User Manual
Page 52
Hardware options installation 52
Multi-processor Online Spare population order
For Online Spare mode configurations with a multiple processors, populate the DIMM slots for each
processor in the following order:
•
RDIMM
o
First: A, B, and C
o
Next: D, E, and F
o
Last: G, H, and I
•
UDIMM
o
First: A, B, and C
o
Last: D, E, and F
o
Do not populate slots G, H, and I.
After installing the DIMMs, use RBSU to configure the system for online spare memory support ("
" on page
Mirrored Memory population guidelines
For Mirrored Memory mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page
•
Always install DIMMs in channels 1 and 2 for each installed processor.
•
Do not install DIMMs in channel 3 for any processor.
•
DIMMs installed on channel 1 and channel 2 of an installed processor must be identical.
•
In multi-processor configurations, each processor must have a valid Mirrored Memory configuration.
•
In multi-processor configurations, each processor may have a different valid Mirrored Memory
configuration.
Single-processor Mirrored Memory population order
For Mirrored Memory mode configurations with a single processor, populate the DIMM slots in the following
order:
•
RDIMM
o
First: A and B
o
Next: D and E
o
Last: G and H
o
Do not populate slots C, F, or I.
•
UDIMM
o
First: A and B
o
Last: D and E
o
Do not populate slots C, F, G, H, or I.
After installing the DIMMs, use RBSU to configure the system for Mirrored Memory support ("
" on page