HP XP P9000 Command View Advanced Edition Software - Manual (Page 259)

Performing user authentication for replica operations
When performing replica operations using command devices and RAID Manager authentication is
enabled, you must execute the OS commands described in this procedure:
1. Start the RAID Manager instance that will be used by Application Agent:
P9000-RAID-Manager-instance-location\etc\horcmstart
P9000-RAID-Manager-instance-number
2. Perform user authentication with the current login user account (the user account for executing
the Application Agent service):
P9000-RAID-Manager-instance-location\etc\raidcfg.exe
-IP9000-RAID-Manager-instance-number -login
command-device-authentication-account password
3. Perform user authentication with the local system account as follows.
1. Create a task that runs on the local system account:
schtasks /Create /TN task-name /TR
“P9000-RAID-Manager-instance-location\etc\raidcfg.exe
-IP9000-RAID-Manager-instance-number -login
command-device-authentication-account password” /SC ONCE /ST 00:00
/RU SYSTEM
2. Run the task immediately:
schtasks /Create /TN task-name
3. Query the results of the task:
schtasks /Query /V /FO LIST
4. Confirm the output is as follows:
TaskName: task-name specified in step 1
Status: Ready (blank in Windows 2003)
Last Run Time: time that step 2 was performed
Last Result: 0
If the Last Result is not 0, check the RAID Manager log information to determine if the RAID
Manager command failed. If the RAID Manager command failed, eliminate the cause of the
error as described in the RAID Manager documentation.
5. Delete the task:
schtasks /Delete /TN task-name /F
4. Confirm that user authentication was successful. Make sure the RAID Manager authentication
files were created using the same account names (with which authentication was performed) as
the user names contained in the file names that execute the commands.
Example authentication file of local system account:
C:\HORCM\usr\var\host01_SYSTEM_53038
Example authentication file of user account for executing Application Agent service:
C:\HORCM\usr\var\host01_Administrator_53038
5. To perform discovery of the new applications, click Refresh Hosts in the Applications view.
User Guide 259