HP XP Array Manager Software - Manual (Page 14)

For details about these instructions and details on how to uninstall Data Retention Utility, see the HP
StorageWorks XP24000/XP20000 Remote Web Console User Guide.
Starting Data Retention Utility
This section describes how to start the Data Retention Utility software.
CAUTION:
Do not perform Data Retention Utility operations if any other program product is running.
To start the Data Retention Utility software:
1. Log on to the SVP (Service Processor) to open the Remote Web Console main window. For detailed
information, see the HP StorageWorks XP24000/XP20000 Remote Web Console User Guide.
To assign access attributes, you must use a user account that has the write permission. If you use
a user account that does not have the write permission, you will be able to view access attributes
but will be unable to assign access attributes.
2. Select Go, Data Retention, and then Data Retention from the menu bar of the Remote Web
Console main window.
The Data Retention window appears (see
Figure 1 on page 15.
3. Change to Modify mode.
If you are going to implement any changes for Data Retention Utility, you must be in Modify
mode. If you are in View mode, you can look at access attributes in the Data Retention window,
but cannot implement any changes.
For detailed information on user accounts or Modify mode, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User Guide.
Preparing for Data Retention Utility Operations 14