HP XP Racks - Manual (Page 122)

Starting Element Manager
All users can perform this task.
You can also start the Element Manager from Device Manager, which allows you to view storage
system information or remotely operate the storage system.
1. From the Resources tab, select Storage Systems.
2. Select a storage system and select Element Manager from the Actions menu (in the upper-right
corner of the application area).
Note that the management tool sometimes cannot start with an SMI-S Enabled storage system because
the URL of the management tool is incorrect. In this case, you need to perform either of the following
operations:
• Use the AddURLLink command of Device Manager CLI to register in the Device Manager server
the URL of the management tool of the SMI-S Enabled storage system.
For details about the
AddURLLink command, see the HP P9000 Command View Advanced
Edition Suite Software CLI Reference Guide.
• Review the settings of the SMI-S provider, and then refresh the SMI-S Enabled storage system from
Device Manager.
Linking related products 122