HP XP Racks - Manual (Page 27)

To update information about hosts, such as the host name, WWN, refresh the hosts.
If connected to P9000 Performance Advisor Software, users can also update performance information
that is displayed in the Mobility tab. To automatically update the storage system information, specify
proper settings in the
server.properties
file or
dispatcher.properties
file of the
management server. For details about specifiable values, see the HP P9000 Command View Advanced
Edition Suite Software Administrator Guide.
Acquiring the most recent storage system information
You refresh storage systems to update the displayed information.
1. From the Administration tab, select Managed Resources.
2. On the Storage Systems tab, select one or more storage systems to refresh.
3. Click Refresh Storage Systems, then OK.
4. Check the Data Collection Tasks tab to verify the completed task.
5. Check for updated storage system information from the Storage Systems tab.
Updated storage system information is also displayed from the Resources tab, Storage Systems
tree.
Operations available to SMI-S Enabled storage systems
You can register storage systems that are managed by an SMI-S provider (SMI-S Enabled storage
systems) as HP StorageWorks P9000 Command View Advanced Edition Suite resources.
The user can perform the following operations to SMI-S Enabled storage systems:
• Register, change, delete, and update SMI-S Enabled storage systems.
• View summary information for SMI-S Enabled storage systems.
• Operate SMI-S Enabled storage systems from the SMI-S Enabled storage system management tool
(activate the management tool from Element Manager).
• Connect or disconnect as external storage systems (by executing CLIs).
Users must be assigned All Resources to reference or perform operations on SMI-S Enabled storage
systems.
For the operations that are executed by CLI, see the HP P9000 Command View Advanced Edition
Suite Software CLI Reference Guide.
Registering hosts
This module describes how to register hosts.
About registering a host
You can register hosts to be managed by Device Manager so that the volumes of the storage system
can be used in the host (application).
You can consolidate LUN paths between storage systems and hosts, or find out the usage status of
storage resources from the hosts' point of view (such as outputting reports for charging each server
that meets its actual capacity).
The following hosts can be registered for Command View AE Suite:
• Normal hosts (An open host that is not virtualized.)
User Guide 27