HP XP Racks - Manual (Page 34)

Refresh Hosts Edit Hosts Item
-- Y Protocol
Y
3
Y
3
and Y
4 Port Type
Y
3
Y
3
and Y
4 WWN
Legend:
• Y : Can be edited or refreshed
• -- : Cannot be edited or refreshed
• Y 1 : For virtualization servers, you can specify IPv4 or IPv6.
• Y 2 : You can specify IPv4 or IPv6.
• Y 3 : WWNs and their port types that have been added can be affected by the Refresh Hosts button,
but deleted WWNs and their port types cannot be affected. To delete such WWNs, the Edit Hosts
button needs to be used.
• Y 4 : If you want to allocate volumes to a FCoE port, you need to manually add a WWN.
1. From the Administration tab, select Managed Resources.
2. On the Hosts tab, select the host to update, then click either Refresh Hosts, or Edit Hosts (specifying
required items before executing the processing).
3. Execute the processing. The task is registered to Data Collection Tasks tab. If you changed settings
in the Edit Hosts dialog box, after the task has completed successfully, execute a refresh operation
using Refresh Hosts.
The host list is updated.
Changing settings for a manually registered host
You can use Edit Hosts to update host information registered by specifying WWN names, or registered
by using the host detection function.
1. From the Administration tab, select Managed Resources.
2. On the Hosts tab, select the host to update, and click Edit Hosts.
3. Specify the required items, and then execute the process.
The host list is updated.
Updating host information registered by using vMA
Use Refresh Hosts to update host information registered by using vMA.
To change authentication information about a registered IP address or user account, edit the IP address
or user account and then execute a refresh operation.
To make changes to each item, see the following table:
Refresh Hosts Edit Hosts Item
Y -- Host Name
-- -- OS Type
Registering managed targets 34