HP XP Racks - Manual (Page 74)

Reason preventing use as a migration source Displayed character string
The volume is part of a Business Copy or Hitachi ShadowImage for
Mainframe S-VOL, and paired with an SP-VOL.
Business Copy Configuration [Leaf]
Business Copy XP Configuration
[Leaf]
The volume is part of a Business Copy or Hitachi ShadowImage for
Mainframe SP-VOL, and paired with two S-VOLs.
Business Copy Configuration [Node]
Business Copy XP Configuration
[Node]
The volume is part of a Business Copy or Hitachi ShadowImage for
Mainframe P-VOL, and paired with three S-VOLs.
Business Copy Configuration [Root],
Business Copy XP Configuration
[Root]
The volume is a system drive. System Disk
The volume is one of the following:
• The volume is part of a Continuous Access Asynchronous pair, and
the status is neither PSUS nor PSUE
• The volume is part of a Hitachi TrueCopy for Mainframe pair, and
the status is not suspended
Continuous Access Asynchronous
Status
Continuous Access XP Asynchronous
Status
The volume is one of the following:
• The volume is part of a Continuous Access Synchronous pair, and
the status is other than PSUS, PSUE, or PAIR
• The volume is part of a Hitachi TrueCopy for Mainframe pair, and
the status is not suspended
• The volume is in an XP12000/XP10000/SVS200, and a part of a
Continuous Access Synchronous pair, and the status is PAIR
• The volume is from an XP12000/XP10000/SVS200, and part of a
Hitachi TrueCopy for Mainframe pair, and the status is Duplex
Continuous Access Synchronous
Status
Continuous Access XP Synchronous
Status
The volume is one of the following:
• The volume is part of a Continuous Access Journal pair, and the status
is either COPY or PAIR
• The volume is part of a Continuous Access XP Journal pair, and the
status is either Pending duplex or Duplex
• The volume is part of a Continuous Access Journal journal volume
• The volume is a Continuous Access XP Journal journal volume
Continuous Access Journal Status
Continuous Access XP Journal Status
Auto LUN V2 is not installed in the storage system. Auto LUN V2
Conditions of volumes that cannot be used as migration targets
Volumes that satisfy the following conditions cannot be specified as migration targets and are not
displayed as candidates for volume pairs:
• Cache Residency Manager or Cache Residency Manager for Mainframe is set for the volume
• The volume is part of a Snapshot Status pair
• The volume is a virtual volume or a pool volume for Snapshot.
• The volume is used as a command device
• The volume is a THP/Smart pool volume
• The volume is a virtual volume and is not associated with THP/Smart pools
Setting up and operating a SAN environment 74