HP XP Racks User Manual
Page 78
Migrating data from an SMI-S Enabled storage system to another storage system
You can migrate data from an SMI-S Enabled storage system to another storage system.
Tasks that must be completed beforehand:
•
The Device Manager CLI is set up.
•
A Tiered Storage Manager license is registered.
•
The Tiered Storage Manager CLI is set up (if necessary).
•
The port of the SMI-S Enabled storage system is connected to the External port of the storage system
via Fibre Channel.
•
The volumes of the SMI-S Enabled storage system are assigned to the External port (performed by
the management tool of the SMI-S Enabled storage system).
Information that should be obtained beforehand:
•
Name or IP address of the allocation target host.
•
The WWN and LUN associated with the migration source SMI-S Enabled storage system that was
assigned to the External port.
For details about the values specified for the parameters and syntax of each CLI command of Device
Manager and Tiered Storage Manager to be used for operations, see the HP P9000 Command View
Setting up and operating a SAN environment
78