HP Compaq t5720 Thin Client - Manual (Page 30)

HP Sygate Security Agent User Guide
Apply Rule to Network Interface
Specifies which network interface card this rule will apply to. If you have multiple network
cards, select one from the list box, or select All network interface cards to apply the rule to
every card.
Apply this rule during Screensaver Mode
Activates the rule even if your device’s screensaver is on (if applicable).
o
On—The rule will be activated only when the screensaver is on. Enable this if
you want to block all traffic and all ports while you device is idle.
o
Off—This rule will be activated only if the screensaver is off and all other
conditions are satisfied.
o
Both On and Off—This rule is unaffected by the screensaver.
Record this traffic in “Packet Log”
Records traffic affected by this rule in the Packet Log.
Rule Summary field
Provides a summary of the rule’s functionality.
Hosts Tab
The Hosts tab is where you can specify the source (IP address, MAC address, or subnet
range) of traffic that you want the rule apply to.
20