HP Laserjet p3015 - Manual (Page 149)

Clean the product
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems, such as toner specks or smearing (see
Solve print-
quality problems on page 182 ).
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.
Clean the paper path
Create and use the cleaning page
1. Press the Menu button .
2. Press the up arrow or down arrow / to highlight the CONFIGURE DEVICE menu, and then press
the
OK button.
3. Press the up arrow or down arrow / to highlight the PRINT QUALITY menu, and then press the
OK button.
4. If the product does not have automatic two-sided printing, press the up arrow or down arrow /
to highlight the CREATE CLEANING PAGE option, and then press the
OK button. If the product
has automatic two-sided printing, go to step 5.
5. Press the up arrow or down arrow / to highlight the PROCESS CLEANING PAGE option, and
then press the
OK button. The cleaning process takes several minutes.
6. Discard the printed page. The task is complete.
ENWW Clean the product 137