Use hp web jetadmin to upgrade the firmware, Upgrade the hp jetdirect firmware – HP Laserjet p3015 User Manual

Page 152

Advertising
background image

4.

Go to the folder where the firmware file is stored.

5.

Press

Enter

on the keyboard.

6.

When prompted for the user name, press

Enter

.

7.

When prompted for the password, press

Enter

.

8.

Type bin at the command prompt.

9.

Press

Enter

. The message 200 Types set to I, Using binary mode to transfer files appears in

the command window.

10.

Type put and then the file name. For example, if the file name is ljp3015.rfu, type put
ljp3015.rfu.

11.

The download process begins and the firmware is updated on the product. This can take several
minutes. Let the process finish without further interaction with the product or computer.

NOTE:

The product automatically turns off and then on again after processing the upgrade.

12.

At the command prompt, type bye to exit the ftp command.

13.

At the command prompt, type exit to return to the Windows interface.

Use HP Web Jetadmin to upgrade the firmware

To learn how to use HP Web Jetadmin to upgrade the product firmware, go to

www.hp.com/go/

webjetadmin

.

Use Microsoft Windows commands to upgrade the firmware

NOTE:

This process requires the product to be shared on a network.

1.

Click Start, click Run, and then type cmd to open the command window.

2.

Type the following: copy /B <FILENAME> \\<COMPUTERNAME>\<SHARENAME>, where
<FILENAME> is the name of the .RFU file (including the path), <COMPUTERNAME> is the name
of the computer from which the product is being shared, and <SHARENAME> is the product share
name. For example: C:\>copy /b C:\ljp3015.rfu \\YOUR_SERVER\YOUR_COMPUTER.

NOTE:

If the file name or path includes a space, you must enclose the file name or path in

quotation marks. For example, type: C:\>copy /b "C:\MY DOCUMENTS\ljp3015.rfu" \
\YOUR_SERVER\YOUR_COMPUTER.

3.

Press

Enter

on the keyboard. The control panel shows a message that indicates the progress of

the firmware upgrade. At the end of the upgrade process, the control panel shows the Ready
message. The message One File Copied appears on the computer screen.

Upgrade the HP Jetdirect firmware

The HP Jetdirect network interface in the product has firmware that can be upgraded separately from
the product firmware. This procedure requires that you install HP Web Jetadmin Version 7.0 or later on

140 Chapter 9 Manage and maintain the product

ENWW

Advertising
This manual is related to the following products: