HP Compaq t5710 Thin Client - Manual (Page 230)

15-16
Initialization Commands
Soft Buttons Displayed
Registry Entry: ButtonLevels = 0-4
Command Line: -BL0-4
Default Setting: 1
These commands are only available for NT or XP embedded versions of the emulator.
A set of soft buttons is displayed at the bottom of the emulatoor window by default.
There are four soft button levels. Level 1 is displayed by default. Each level consists of
twelve programmable buttons, providing a combined total of 48 buttons. You can
display all four levels (48 buttons) at the same time if required. All levels are accessible
even if not all are displayed, levels stored off-screen can be 'scrolled' into view by
clicking the Level button.
You can specify how many soft button levels are actually displayed by using this
registry entry or command line option. All four levels can be displayed by specifying
4. Specifying 0 will cause no soft buttons to be displayed.
Disable Status Bar & DEC Status Line
Registry Entry: StatusLine = "off"
Command Line: -V
Default Setting: on
These commands will remove the status bar and DEC VT Status line at the bottom of
the window.
Disable Colour Palette
Registry Entry: UsePalette = "off"
Command Line: -SP
Default Setting: on
The colour palette used by the emulator can be disabled if it interferes with colours
used by other applications running at the same time.