HP Compaq t5710 Thin Client - Manual (Page 44)

3-2
Keyboard Configuration
This enables you to redefine the function of most of the keys on your keyboard,
including the key combinations listed below:
Key
Shift + Key
Control + Key
Control + Shift + Key
Alt + Key
Alt + Shift + Key
Alt + Control + Key
Alt + Control + Shift + Key
Each definition may contain a string of up to 127 characters. The combined total of
all the characters that may be programmed into keys is determined by the 127
character limit per definition and the amount of memory available in your terminal.
The Predefined Macros box enables you to select from a list of standard functions
associated with the current terminal emulation. Clicking the arrow button will display
a list box in which the names of valid key functions (called virtual key names) are
shown.
Note: The Virtual Key Names appendix lists all the functions and
associated virtual key names for each terminal emulation.
Note that a virtual key name will be sent across a network as a single packet, whereas
an escape sequence will be split into several packets. If a required function has a
virtual key name equivalent, use this instead of the escape sequence.
A key definition may be actioned locally or transmitted to the host when the key or
key combination is pressed. This is determined by the setting of the Local check box.
When unchecked the definition will be transmitted to the host.
The Current Macro Definitions box displays the key and key combinations that are
currently defined. You can remove the selected definition or delete all the definitions
by clicking the relevant Remove button.
Defining A Key Or Key Combination
1. Click in the Program Key box then press the key or key combination to define.
The current definition will be displayed.
2. Click in the With box then enter the new definition, or make a selection from the
list of Predefined Macros then click Apply.
3. Check the Local check box to make the key definition action locally, or uncheck
it to transmit the definition to the host when the key or key
combination is pressed.
4. Click the Add button to accept the definition. The new definition will be added to
the Current Macro Definitions list.