HP Compaq t5710 Thin Client - Manual (Page 70)

6-10
Setup Menus
The Defined Sessions list box displays the names of connection templates that were
created using the Save Session As dialog box. The name of the connection template
currently in use is highlighted. The factory default connection template is Untitled.
Selecting one of the descriptions then clicking the OK button will cause the dialog box
to close and the connection template associated with the chosen description to be
actioned.
You can specify a particular connection template to use by default by clicking the
required description then clicking the Save As Default button. To delete a connection
template, select the description then click the Delete button.
Close Session
(Not available in WBT mode)
This will close the current session.
Save Session
Selecting this option will save the current session configuration.
Save Session As...
(Not available in WBT mode)
This will display a dialog box which enables you to save the current session
configuration as a connection template.
You can create multiple connection templates, any one of which can be selected for
use. The procedure is as follows:
1. In the Saved Items box, indicate which settings are to be saved by checking the
boxes next to the relevant options.
2. In the Save As File Name text box, enter a descriptive name to enable it to be
identified for future selection. This description will be listed in the Open Session
dialog box.