Solve printer management problems, Embedded web server cannot be opened – HP Officejet Pro 8600 User Manual

Page 149

Advertising
background image

NOTE: At this time, some portions of this site are not available in all languages.

Solve printer management problems

TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.

This section provides solutions to common problems that involve managing the printer.
This section contains the following topic:

Embedded web server cannot be opened

NOTE: To use the embedded EWS, the printer must be connected to a network
using either an Ethernet or a wireless connection. You cannot use the embedded
web server if the printer is connected to a computer with a USB cable.

Embedded web server cannot be opened

Check your network setup

Make sure you are not using a phone cord or a crossover cable to connect the
printer to the network.

Make sure the network cable is securely connected to the printer.

Make sure the network hub, switch, or router is turned on and working correctly.

Check the computer
Make sure the computer that you are using is connected to the network.

NOTE: To use the EWS, the printer must be connected to a network using either
an Ethernet or a wireless connection. You cannot use the embedded web server if
the printer is connected to a computer with a USB cable.

Check your web browser

Make sure the web browser meets the minimum system requirements. For more
information, see Embedded web server specifications.

If your web browser uses any proxy settings to connect to the Internet, try turning
off these settings. For more information, see the documentation available with
your web browser.

Make sure JavaScript and cookies are enabled in your web browser. For more
information, see the documentation available with your web browser.

Solve printer management problems

145

Advertising