Turn on accessories in the printer driver, To turn on accessories (windows), To turn on accessories on (mac os x) – HP Officejet Pro 8600 User Manual

Page 36

Advertising
background image

NOTE: To use the tray lock and default tray settings, you must select the
automatic tray selection option in the printer software. Also, if the printer is on a
network and you set a default tray, the setting will affect all users of the printer.

Tray 2 is designed to hold only plain paper.
The following table lists possible ways you can use the tray settings to meet your
printing needs.

I want to...

Follow these steps

Load both trays with the same media, and
have the printer pick media from one tray if the
other one is empty.

Load media in Tray 1 and Tray 2. For
more information, see Load media.

Make sure tray lock is disabled.

Have both special media (such as letterhead)
and plain paper loaded in the trays.

Load special media in Tray 1 and plain
paper in Tray 2.

Make sure the default tray is set to Tray
2.

Make sure tray lock is set to Tray 1.

Load media in both trays but have the printer
pick media from a specific tray first.

Load media in Tray 1 and Tray 2.

Make sure default tray is set to the
appropriate tray.

To configure the trays
1.

Make sure the printer is turned on.

2.

Touch (right arrow), touch Setup, touch Preferences, and then select Default
Tray
or Tray Lock.

3.

Click OK or Apply after changing the desired tray settings.

Turn on accessories in the printer driver

To turn on accessories (Windows)

To turn on accessories on (Mac OS X)

To turn on accessories (Windows)
1.

Click Start, and then click Printers or Printers and Faxes or Devices and
Printers
.
- Or -
Click Start, click Control Panel, and then double-click Printers.

2.

Right-click the printer icon, and then click Printer Properties.

3.

Select the Device Settings tab. Click the accessory that you want to turn on,
click Installed from the drop-down menu, and then click OK.

To turn on accessories on (Mac OS X)
Mac OS X automatically turns on all accessories in the printer driver when you install
the printer software. If you add a new accessory later, follow these steps:
1.

Open the System Preferences and then select Print & Fax or Print & Scan.

2.

Select the printer from list of printers, and then click Options & Supplies.

Chapter 1

32

Get started

Advertising