HP Officejet Pro 8600 - Manual (Page 76)

When an incoming fax call is received, the printer compares the number to the list of
junk fax numbers to determine if the call should be blocked. If the number matches
a number in the blocked fax numbers list, the fax is not printed. (The maximum number
of fax numbers you can block varies by model.)
NOTE: This feature is not supported in all countries/regions. If it is not supported
in your country/region, Junk Fax Blocker does not appear in the Fax Options or
Fax Settings menu.
NOTE: If no phone numbers are added in the Caller ID list, it is assumed that you
are not subscribed to a Caller ID service.
• Add numbers to the junk fax list
• Remove numbers from the junk fax list
• Print a Junk Fax Report
Add numbers to the junk fax list
You can block specific numbers by adding them to the junk fax list.
To add a number to the junk fax list
1.
Touch Setup.
2. Touch Fax Setup, and then select Basic Fax Setup.
3. Touch Junk Fax Blocker.
4. A message appears stating that Caller ID is required to block junk faxes. Touch
OK to continue.
5. Touch Add Numbers.
6. To select a fax number to block from the caller ID list, touch Select from Caller
ID History.
- or -
To manually enter a fax number to block, touch Enter new number.
7. After entering a fax number to block, touch Done.
NOTE: Make sure you enter the fax number as it appears on the control
panel display, and not the fax number that appears on the fax header of the
received fax, as these numbers can be different.
Remove numbers from the junk fax list
If you no longer want to block a fax number, you can remove a number from your junk
fax list.
To remove numbers from the list of junk fax numbers
1.
Touch (right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Basic Fax Setup.
3. Touch (down arrow), and then touch Junk Fax Blocker or Junk Fax Blocker
Setup.
4. Touch Remove Numbers.
5. Touch the number you want to remove, and then touch OK.
Chapter 6
72 Fax