HP Officejet Pro 8600 - Manual (Page 63)

1. Load your original print-side down on the right-front corner of the glass or print-
side up in the ADF. For more information, see Load an original on the scanner
glass or Load an original in the automatic document feeder (ADF).
2. Touch Scan, and then touch Email.
3. On the control panel display, select the name that corresponds to the Outgoing
Email Profile you want to use.
4. If prompted, enter the PIN.
5. Select the TO email address (the email recipient) or enter an email address.
6. Enter or change the SUBJECT for the email message.
7. Change any scan settings, and then touch Start Scan.
NOTE: The connection might take some time, depending on network traffic and
connection speed.
Use HP Digital Fax
After you set up HP Digital Fax, any black-and-white faxes that you receive print, by
default, and then are saved to the designated destination—either the network folder or
email address that you have specified:
•
If you are using Fax to Network Folder, this process happens in the background.
HP Digital Fax does not notify you when faxes are saved to the network folder.
• If you are using Fax to Email and if your email application is set to notify you
when new email messages arrive in your inbox, you can see when new faxes
arrive.
NOTE: Fax to Email is only supported by HP Officejet Pro 8600 Plus and HP
Officejet Pro 8600 Premium.
Use the HP Digital Solutions 59