5 monitoring wwns, Displaying wwns to be monitored, Adding or removing wwns to be monitored – HP XP P9500 Storage User Manual
Page 17: Adding new wwns to ports, Displaying wwns to be
5 Monitoring WWNs
This chapter describes how to set up WWNs to be monitored.
Displaying WWNs to be monitored
Use the Performance Monitor window to display the list of WWNs to be monitored.
1.
Display the Remote Web Console main window.
2.
Select Performance Monitor in Explorer, and select Performance Monitor in the tree.
The Performance Monitor window opens.
3.
Select the Monitored WWNs tab.
WWNs to be monitored are listed in the tab.
Adding or removing WWNs to be monitored
Use the Performance Monitor window to add or remove WWNs to be monitored.
1.
Display the Remote Web Console main window.
2.
Select Performance Monitor in Explorer, and select Performance Monitor in the tree.
The Performance Monitor window opens.
3.
Display the Monitored WWNs tab.
4.
Click Edit WWN Monitor Mode.
The Edit WWN Monitor Mode window opens.
5.
Add or Remove WWNs to be monitored.
If you add WWNs to monitoring s, select WWNs from the Unmonitored WWNs field and
click Add. If you remove WWNs from monitoring s, select WWNs from the Monitored WWNs
field and click Remove.
6.
Click Finish.
7.
Click Apply.
If WWNs are removed, a confirmation message appears.
8.
Click OK to close the message.
The settings that you have made are registered in the system.
Adding new WWNs to ports
Use Performance Monitor to monitor WWNs not connected to DKC.
1.
Display the Remote Web Console main window.
2.
Select Performance Monitor in Explorer, and select Performance Monitor in the tree.
The Performance Monitor window opens.
3.
Display the Monitored WWNs tab.
4.
Click Add New Monitored WWN.
The Add New Monitored WWNs window opens.
5.
Specify the WWN information, and then click Add.
The added WWN is displayed in Selected WWNs.
Displaying WWNs to be monitored
17