Use single-cartridge mode, Exit single-cartridge mode, Cartridge warranty information – HP Deskjet 3050A User Manual
Page 32
d. Close cartridge door.
5.
Align cartridges.
Related topics
•
•
Use single-cartridge mode
Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated
when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can only print
jobs from the computer.
NOTE:
When the HP All-in-One operates in single-cartridge mode, a message is displayed on screen. If the message is
displayed and two print cartridges are installed in the product, verify that the protective piece of plastic tape has been
removed from each print cartridge. When plastic tape covers the print cartridge contacts, the product cannot detect that the
print cartridge is installed.
Exit single-cartridge mode
Install two print cartridges in the HP All-in-One to exit single-cartridge mode.
Related topics
•
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not
cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not
been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the product as indicated:
For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the product.
Chapter 7
30
Work with cartridges