HP LT4200 42 inch Professional LCD HDTV - Manual (Page 40)

30
HP HDTV User’s Guide
You operate the OSD menus by using the buttons on
the remote control or the TV; refer to the previous tables
for descriptions of the buttons.
1
Press the Source button to select the input signal
source for the TV. The OSD menus and options that
you see depend on the current input source.
2 Press the Menu button to open the OSD. The
available menus appear as a list.
3 Press the direction buttons (the arrow buttons on
the remote control, or the Channel and Volume
buttons on the TV) to highlight the menu that you
want, and then press the OK button on the remote
control, or the Select button on the TV.
4 Press the direction buttons to move within the menu
and highlight an option, and then press the OK
button on the remote control, or the Select button
on the TV, to move into the option.
5
Continue using the direction buttons to highlight
and adjust an item, and the OK button or the
Select button to enter the change. To move out of
an option, or to move up one menu level, press the
Back button on the remote control, or the Source
button on the TV.
6 When you are finished, press the Menu button to
close the OSD.
The OSD menus are:
■
Picture
■
Audio
■
Channel
■
Parental (Control)
■
Setup (including Closed Caption)
When you open the OSD, the SimpleMenu displays.
The SimpleMenu is the list of the most frequently used
menu items:
■
Picture
■
Mode: Standard, Studio Vibrant, User
■
Color Temp: Cool, Standard, Warm
■
Aspect Ratio: Auto, 16:9, 4:3, Zoom1,
Zoom2, Panarama
■
PC: Auto Sync
■
Audio
■
Mode: Voice, Standard, Music, User
■
Auto Volume: On/Off
■
Virtual Surround: Off, Theater, Music Hall
■
Speaker: On/Off
■
Setup
■
Caption: On/Off/On Mute
■
Default Settings (reset)
To see the full list of OSD menus, you must select the
Full Menu.
Selecting the Full Menu
To select the Full Menu, you must enter a passcode
using the remote control buttons:
1
Press Menu to open the OSD menus.
2
Press the Down Arrow button to select Setup,
and then press OK. The Setup menu opens with
Caption highlighted.
3
Press the following remote control buttons in order:
MTS, 7, 0, 4.
The Full Menu OSD displays.
The Full Menu becomes default and displays even after
turning off the TV.
Selecting the SimpleMenu
To display the SimpleMenu:
1
Press Menu to open the OSD menus.
2
Press the Down Arrow button to select
SimpleMenu, and then press OK.
The SimpleMenu displays.
The SimpleMenu becomes the default and displays
even after turning off the TV.
In the following topics, a table lists each OSD menu
and the available options.