HP Scitex LX800 Industrial Printer series - Manual (Page 5)

1 Introduction
Purpose
The Dual Roll Kit enables you to print on two rolls of substrate simultaneously.
Main components
The Dual Roll Kit includes the following components.
● Two dual-roll spindles, each including one differential hub
● One pair of substrate edge holders
● One Allen key 4
● One Allen key 6
● Spindle supports on which to rest the spindle when it is not in use
Requirements
Before using the Dual Roll Kit with an HP Designjet L65500 printer, you must check that the printer's
firmware and HP Internal Print Server software are up to date.
Go to http://www.hp.com/ and click Support & Drivers > Download drivers and software (and
firmware), enter the product name L65500, click the name of your operating system, and download
the latest firmware and the latest Internal Print Server, if you do not already have them.
If the firmware and software versions on HP's Web site are still dated 2009, try the following FTP site.
FTP System ftp://ftp.usa.hp.com/ (15.192.32.78)
Login dualroll
Password (case-sensitive) Milieux2
Access type read-only
FTP Access ftp://dualroll:[email protected]/
or ftp://dualroll:[email protected]/
ENWW Purpose 1
Introduction