Specks, Light print, Light print (partial page) – HP LaserJet 4250 User Manual

Page 186: Light print (entire page)

Advertising
background image

Light print (partial page)

1. Make sure that the print cartridge is fully installed.

2. The toner level in the print cartridge might be low. Replace the print cartridge.

3. The media might not meet HP specifications (for example, the paper is too moist or too

rough). See

Paper specifications

.

4. The printer might be due for maintenance. Check this by printing a copy of the supplies

status page. (See

Supplies status page

.) If maintenance is due, order and install the

printer maintenance kit. (See

Performing preventive maintenance

.)

Light print (entire page)

1. Make sure that the print cartridge is fully installed.

2. Make sure that the EconoMode setting is turned off at the control panel and in the printer

driver.

3. Open the Configure Device menu at the printer control panel. Open the Print Quality

submenu and increase the TONER DENSITY setting. See

Print Quality submenu

.

4. Try using a different type of paper.

5. The print cartridge might be almost empty. Replace the print cartridge.

Specks

Specks might appear on a page after a jam has been cleared.

1. Print a few more pages to see if the problem corrects itself.

174

Chapter 4 Problem solving

ENWW

Advertising
This manual is related to the following products: