Configure device menu, Printing submenu – HP LaserJet 4250 User Manual

Page 225

Advertising
background image

Configure Device menu

This menu contains administrative functions.

Printing submenu

Print Quality submenu

System Setup submenu

Stapler/stacker submenu

I/O submenu

Resets submenu

Printing submenu

Some items on this menu are available in the program or printer driver (if the appropriate
driver is installed). Program and printer driver settings override control-panel settings. In
general, it is better to change these settings in the printer driver, if applicable.

The section that follows lists the settings and possible values. In the Values column, the
default value for each setting is the one with an asterisk (*) next to it.

Item

Values

Explanation

COPIES

*1 to 32000

Sets the default number of copies by selecting
any number from 1 to 32000. Use (

U

P

button ) or (

D

OWN

button) to select the number

of copies, or use the numeric keypad, if
available, to specify the number of copies.

Use (

S

ELECT

button) after specifying the

number of copies. The Setting saved message
appears.

This setting applies only to print jobs that do not
have the number of copies specified in the
program or printer driver, such as an MS-DOS,
UNIX, or Linux application.

NOTE

It is best to set the number of copies in the
program or printer driver. (Program and printer
driver settings override control-panel settings.)

ENWW

Configure Device menu

213

Advertising
This manual is related to the following products: