Removing a hot-plug sas hard drive – HP ProLiant ML370 G6 Server User Manual
Page 58
Advertising
Hardware options installation 58
2.
Prepare the hard drive.
3.
Install the hard drive.
4.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
SATA hard drive LED combinations
" on page
).
Removing a hot-plug SAS hard drive
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
SATA hard drive LED combinations
" on page
).
2.
Back up all server data on the hard drive.
Advertising
This manual is related to the following products: