HP 200 Storage Virtualization System - Manual (Page 19)

3 Working with CLPRs
Figure 4 Partition Definition pane (CLPR selected)
•
CU: Displays the selected CU's parity groups in the CLPR resource list.
NOTE:
You cannot specify the number of a CU belonging to a CU group other than the current CU group.
To change the CU group, use the drop-down list for CU groups in the upper right of the XP Remote
Web Console main pane. For more information about CU groups, see the HP StorageWorks XP
Remote Web Console user guide for XP12000/XP10000/SVS200.
• Tree: Lists the array's SLPRs and CLPRs. The SLPR number and name appear to the right of the
SLPR icon ( ). The CLPR number and name appear to the right of the CLPR icon ( ).
SLPRs belonging to a CU group other than the current CU group have this icon ( ) and are grayed
out. CLPRs belonging to a CU group other than the current CU group have this icon ( ) and are
grayed out. You cannot select these SLPRs and CLPRs.
• CLPR resource list: Displays information about the selected CLPR.
• No.: List's line number.
• Resource Type: Type of CLPR resource. Parity Group appears in this column.
• Address: Parity group's address. If the address begins with E (for example, E1-1), the parity
group contains external LUs. If the address begins with V (for example, V1-1), the parity group
contains virtual volumes.
• Properties: For a parity group containing internal volumes of the array, the parity group's
capacity and the RAID configuration appear. For a parity group containing external LUs, the
HP StorageWorks 19