HP StorageWorks XP Remote Web Console Software User Manual
HP Storage
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP1024/Xp128
- Contents
- About this guide
- 1 LUN Manager for the XP1024/XP128
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- iSCSI environments
- LUN Manager operations
- Starting LUN Manager
- LUN Manager main pane
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Figure 13 Add New WWN dialog box (Fibre Channel)
- Figure 14 Add New iSCSI Name dialog box (iSCSI)
- Figure 15 Add New WWN dialog box (when registering a host that has previously been connected to the disk array)
- Figure 16 Add New iSCSI Name dialog box (when registering a host that has previously been connected to the disk array)
- Associating host groups to logical volumes
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Making settings on iSCSI ports and iSNS servers
- Checking the status of connection between hosts and the disk array (iSCSI environment only)
- Setting user authentication (iSCSI environments only)
- Starting User Authentication Operations
- User Authentication tab
- Specifying whether to enable or disable host authentication on a port
- Registering user information of hosts on a port
- Changing user information of hosts
- Deleting user information of hosts
- Specifying user information of ports (when performing mutual authentication)
- Clearing user information of ports (when performing mutual authentication)
- Relationship between port settings and connection results
- Operational restrictions
- 2 Volume Management for the XP1024/XP128
- Volume Management (LU Size Expansion)
- Custom Volume Size (CVS)
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- CVS operations
- Starting CVS operations
- Customized volume pane
- Viewing CVS configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 33 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 34 Install CV pane (1) for other than OPEN-V
- Figure 35 Install CV pane (1) for OPEN-V after clicking Set
- Figure 36 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 37 Install CV pane (2)
- Figure 38 Select an LDEV number
- Figure 39 Setting the SSID
- Figure 40 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Operational restrictions
- Index